$14 DIY Basket & Twine Pendant Light

After long last, I am excited to share a project with you that I did in preparation for Walker’s parent’s visit the other weekend.

For over 3 years, I have lived in this apartment with just one floor lamp for the entire living room. It was a terrible lamp and the only place to put it was all the way on the opposite side of the room from where we actually spend time. USELESS. So as a result, we packed it with 100 watt bulbs and it would blind us with it’s cruel, harsh beams. We have discussed hanging a pendant light over the couch for ages but have never taken the plunge.

Fast forward to about a month ago when I received the IKEA catalog in the mail (oh, happy day!). I was flipping through and saw the $5 HEMMA cord set. ONLY FIVE DOLLARS?! Sold. The wheels in my brain started turning (scary, I know) and I thought of a few cool DIY lamp shades I have seen. None of the ideas really fit our room but I loved the concept of the wire basket lamp shade I saw on Pinterest. Then it all came together….

DIY Basket & Twine Pendant Light


First I went to IKEA and the hardware store to pick up supplies:

HEMMA Light Kit – $5
14″ Hanging Flower Basket – $7
1/2″ Plumbing Flange – $2
Twine – Free! I had a bunch leftover from other projects :)

Tools:
Wire cutters
Scissors
Sweater Shaver (Yes, I’m serious. You’ll see…)

Optional:
DIMMA dimmer cord – $8

1. Remove the natural liner from inside the wire basket and take a look at the design of the base. Mine was a simple X but yours may require a some alternate wire cutting. I wanted to cut enough of an opening in the base to allow the light fixture through the basket but keep the wires close enough so that they would rest on the flange.

2. Once you have your wires cut, test to make sure everything will fit together before you bust out the twine. Place the flange over the light kit. You can buy a wider flange and put it on the correct side of the light kit as the instructions suggest. However, I wanted the bulb to hang a little lower (to create a little more space between the shade and the bulb for fire safety reasons) so I placed the flange higher on the light kit (see pic below). Then hang the shade on light kit and flange combination and you should have a basic idea of what the bones of your light will look like!

I wanted to make sure the lamp was far enough away from the shade!

In the picture above, rather than unscrew the piece on the left and place the flange in there as the instructions suggest, I instead ran the cord all the way through the flange and placed it to the right of the entire bulb unit.

The bare bones of your lamp! Sorry for the terrible pic… I cut it off and never took a better pic. I promise I wasn’t trying to be artsy. ;)

3. Here comes the tedious part: wrapping the twine. I tried a few attempts I wasn’t crazy about. I thought vertical stripes left too much bulb showing and would send us into sad flashbacks of being blinded by our other lamp.

I really wanted something softer and more cozy, so I decided to go with the simple over/under technique to cover the entire shade. This took me several hours over several days… it is a serious commitment, folks. Not only did I end up having to buy more twine (okay, you caught me… add a few extra bucks to the grand total) but I managed to hurt my back crouched over the stupid lamp for so long (old lady!). Also, I discovered the one thing in the world that sheds more than Bo: a twine lamp in the construction phase. Be ready to get out your vacuum.

A few notes on my process:
– As I ran out of twine, I would tie on a new piece and make sure the knot fell where the twine was going behind a wire (so it would be visible on the inside instead of the outside).
– Pull the string tightly enough that you get a distinct over/under look but not too tight. You want to leave yourself a little wiggle room for when you get to the end and are trying to finish it off.

4. Once I had wrapped just about as much twine as humanly possible, I decided that the plain black bottom wire looked cheap and the lamp looked unfinished (sorry no pic!). So I finished the lamp off with a cute little twist at the bottom, wrapping the twine around the bottom wire and the last two passes of twine (to make sure the twine didn’t slide upward away from the bottom wire).

5. After the shade was finished, its twine hair looked as disheveled as my morning hairdo (true story). So I used a pair of scissors and a sweater shaver to give it a little haircut. Sadly, I managed to break my sweater shaver but it WAS working well prior to its destruction.

6. I re-assembled all of the lamp pieces and finally got to take a look at what my final product would look like! Feel free to use a little glue to attach the flange to the wire shade to keep it steady.

7. Time to hang the lamp! Make a little pencil mark in the ceiling where you’d like to hang it and use the enclosed hooks and instructions to get the hook in place. I did this and ended up with a hook so loose that I could practically use my mind to make it fall out of the ceiling. So plan B… I found a plastic molly in my tool box that actually fit the hook I was using for the ceiling! WOOO! So I drilled a hole in the ceiling, inserted the molly, and then screwed in the hook. SOLID AS A ROCK. And it’s a good thing too because the massive amounts of twine made the lamp shade pretty heavy! The second hook by the wall screwed in nice and tight so there was no need for another molly (plus this hook was not bearing any weight… it is just there to redirect the wire).

8. Follow the instructions included in the kit to figure out how to rig up the little plastic wire holders (so the weight of the lamp is not on the bent wire). I even tried to use the flower basket chains as a decorative accent along the wire but it didn’t look great so I took it down.

9. Plug her in and you have yourself a DIY Basket & Twine Pendant Light! We even added the bonus dimmer switch so we can vary the brightness of the lamp (**NOTE: DO NOT USE THE BULB PROVIDED IN THE LIGHT KIT WITH THE DIMMER. They are not meant to be in love and will set your house on fire**). We used one of our leftover 100 watt incandescent light bulbs from the old lamp (max wattage is 150 for the lamp kit) so we can go nice and bright if we want to! Or we can make the light dim and cozy for movie nights. :)

The living room is like a new place now… all for only $14 (okay… about $25 if you count the dimmer cord and the extra twine). We love our new lamp!!



Related Posts Plugin for WordPress, Blogger...

14 Responses to "$14 DIY Basket & Twine Pendant Light"

Add Comment
  1. Susan

    September 20, 2012 at 8:04 pm

    Erika, we both thought it was stunning. It adds such charm and warmth to the whole room. And if you’re looking to replace your sweater shaver, I recommend a sweater stone over a shaver.

    Reply
    • Erika

      September 20, 2012 at 8:22 pm

      Thank you so so so much! I am so glad you got to see this lamp instead of the terrible old one! ;)

      And THANK YOU… my sweater shaver was pretty much useless in its old age! Fall is coming and I will need to get my sweaters in tip-top shape again so I appreciate the recommendation. xoxo

      Reply
  2. Melanie

    September 21, 2012 at 5:16 am

    That is adorable! You’re so creative. :)
    Love the twine.
    I’m pretty sure that would cost at least $100 in a store.

    Reply
    • Erika

      September 21, 2012 at 7:52 am

      Thanks Melanie! I am so happy with the way it turned out. :)

      Reply
  3. Ashley

    September 21, 2012 at 9:22 am

    I heart this!

    We basically have the same three shade standing lamp in our living room, and I hate hate hate it. Thankfully it’s right by where we sit thanks to an extension cord (which is visible at all times, blech).

    I have a plan in my head for a light, too, and was checking out the Hemma cord last night! How handy.

    Reply
    • Erika

      September 21, 2012 at 9:30 am

      Thanks Ashley! Ugh, that is the worst… lighting a room well (and having it look good) is hard to do! I can’t wait to see your light plan! :)

      Reply
  4. Vicki

    September 21, 2012 at 9:26 am

    That lamp is so cute! How clever are you! I’ve already gone and pinned this one….you’ve inspired me to do something creative with my lamps. Have a great weekend :)

    Reply
    • Erika

      September 21, 2012 at 9:30 am

      Yayyyy! Thanks Vicki! I am so glad you were inspired! Please let me know how they turn out!

      Have a wonderful weekend! :)

      Reply
  5. Lisha @ 1house1couple

    September 21, 2012 at 2:11 pm

    That is so awesome Erika. It looks like that must have taken a lot of good long work to make the twine look that good! And I can’t believe it only cost you $14 to make it. I agree with Melanie that would definitely go for $100 in a store!

    great job :)

    ~Lisha

    Reply
    • Erika

      September 21, 2012 at 2:40 pm

      Thank you Lisha! It really did take a long time but it was worth it! I should start making these and selling them for a serious profit! ;)

      Reply
  6. Dad

    September 21, 2012 at 3:17 pm

    Absolutely amazing considering that you couldn’t even plug in a light or turn one off when you lived here!!!!! Very, very nice!!! Miss you – Dad

    Reply
    • Erika

      September 21, 2012 at 5:25 pm

      Haha VERY FUNNY! I learned how to turn lights off pretty quickly once I was the one paying the electric bill! ;)

      Glad you like it! Love you and miss you Dad!

      Reply
  7. Carolyn

    April 13, 2013 at 7:14 am

    This lamp looks fantastic. I am going out to hardware store NOW to buy twine. My husband is constantly beaning himself on the glass fixture above our kitchen table, your idea and your lamp are a real inspiration and now he can stop being paranoid about those recurrent head injuries. THANK YOU.

    Reply
    • Erika

      April 13, 2013 at 10:33 am

      Thank you so much Carolyn and welcome! So glad you were inspired and so happy this will make make your husband’s noggin much safer! ;)

      Reply

Leave a Reply to Ashley Cancel reply

Your email address will not be published. Required fields are marked *